Uneven heating is one of the most common complaints we hear from homeowners across Westchester and Connecticut. You crank up the thermostat, but the bedroom at the end of the hall stays cold while the living room near the furnace feels like summer. Here's what's usually causing it — and what we do about it.

Leaky or Unbalanced Ductwork

This is the most common culprit. When ducts develop leaks — even small ones — a significant amount of heated air escapes before it reaches the rooms furthest from your furnace. We use pressure testing and inspection to identify exactly where the leaks are, then seal and balance the system so every room gets its fair share.

Blocked or Closed Vents

It sounds obvious, but furniture positioned over floor vents or closed registers in unused rooms can throw off your entire system's airflow balance. Before anything else, do a quick walk through and make sure every vent in your home is open and unobstructed.

An Undersized or Aging Furnace

A furnace that's too small for your home's square footage will always struggle to heat the rooms furthest from the unit. An aging furnace that's lost efficiency will have the same problem. If your system is over 15 years old and you're experiencing uneven heating, it may be running out of capacity.

Poor Insulation in Certain Rooms

Rooms over garages, corner rooms with two exterior walls, or spaces with older windows lose heat faster than the rest of the house. Your HVAC system can compensate to a degree, but it's worth addressing the insulation separately for a long-term fix.

What We Do

When a homeowner calls us about uneven heating, we start with a full system assessment — furnace output, duct condition, airflow balance, and room-by-room temperature mapping. From there, we give you a prioritized list of what will actually make a difference, and what it will cost. No unnecessary work, no inflated estimates.